COMET System NEWSLETTER  -  September 2023
New COMET sensors: innovations for a wide range of applications
Introducing our newest products that are used in a wide range of applications.

With the new P8653 sensors you not only have the ability to monitor temperature and humidity, but also to detect flooding thanks to the built-in flood detector.

The new P3116 sensors stand out thanks to their interchangeable probe for measuring temperature and relative humidity. This probe works without the need for calibration with a specific device and regardless of the length of the supply cable. This gives you maximum flexibility when deploying our sensors in a variety of environments.

MSxx monitoring systems NEW with Ethernet interface included in the price and compatible with COMET Cloud for only 2 credits per 1 year.

Another new device is IoT sensor for Sigfox network W0854P. This device integrates a pulse counting input along with a built-in temperature sensor. Featuring a robust design, IP65 protection, and an extended battery life, this device can be utilized in virtually any environment.

With our measuring instruments, you have control over important parameters in your environment and gain valuable information for optimal management and monitoring.
Dual Channel Web Sensor with Flood Detector and Binary Inputs - P8653
Web Sensor P8653 sensors with Ethernet connection are used to measure temperature and relative humidity. The instruments are equipped with two connectors for connecting external temperature and humidity probes and three binary inputs for sensing two-state quantities.
A voltage-free contact or a two-level voltage signal can be connected to the binary inputs.

The P8653 sensor has a dedicated first binary input for the LD-81 flood detector. The device can be powered via PoE or from an external power adapter.
more information
Temperature and relative humidity sensor - P3116
The P3116 sensor with 4-20 mA current outputs is designed to measure temperature and relative humidity using an external probe.
The external probe is interchangeable without the need to calibrate with a specific instrument and regardless of the length of the supply cable, which can be 1, 2 or 5 meters long.
Suitable for applications where the complete set cannot be sent for calibration but only the DIGIL probe can be sent.
more information
Analog output 4-20mA in COMET Cloud: Bridging the traditional and modern worlds of technology
Did you know about the possibility of recording measured data from analog sensors with 4-20mA output directly in COMET Cloud?

The converter P2520 allows conversion of the measured current (0-20mA or 4-20mA) to the specific values of the physical quantities that the sensor measures.
Thanks to the Web Sensor P2520, which was designed to connect two sensors with current output to an Ethernet network, it is now possible to send data directly to the COMET Cloud.

This means that you can now connect not only sensors with 4-20mA output made by COMET (e.g. certified sensors for use in explosion hazardous environments according to ATEX standard), but also sensors from other manufacturers, such as anemometers, flow meters, noise meters and others.
This innovative technology allows you to centrally monitor and analyse data from different types of sensors, giving you a complete overview.
Two-channel converter Web Sensor from current loop 0-20mA - P2520
The P2520 dual-channel current loop transmitter allows on-line monitoring of sensors and devices with analog signals.
It is designed to connect sensors with 0-20 mA / 4-20 mA output to an Ethernet network.
The measured current can be converted to the value of the physical quantity measured by the connected sensor. The sensor can be powered directly from the P2520 transmitter.
more information
MS monitoring systems NEW with Ethernet interface included in the price!!!
From 1 September 2023, all MS monitoring systems are supplied with the MP042 Ethernet interface included in the price. We have made this change to simplify the product selection for our customers, but also because all current models of monitoring systems now allow sending measurement data to the COMET Cloud.

With every newly purchased measuring panel you will get 3 months in COMET Cloud for free!
The annual fee for running a 16 channel monitoring system in the COMET Cloud is only 2 credits!
Sigfox Sensor with pulse counting input and internal temperature sensor - W0854P
The W0854P measures the temperature from the built-in sensor with the possibility of installation directly into the measured space thanks to IP65 protection.
The sensor also has a pulse counting input that is connectable to all energy meters with pulse output. When connected to a suitable sensor on the production line, it can count e.g. pieces produced or be used to measure the average frequency of the input pulses (suitable e.g. for measuring wind speed when the input is connected to an anemometer).
more information
YouTube LinkedIn

COMET System, s.r.o.
Bezrucova 2901
756 61  Roznov pod Radhostem
CZECH REPUBLIC
Tel.: +420 571 653 990
E-mail: info@cometsystem.com
www.cometsystem.com