Counted values (dew point…)
|Maximum switching voltage, current, power of relay output||50V, 2A, 60VA|
|Audible alarm||from built-in beeper - switchable|
|Relative humidity range||0 to 100%|
|Accuracy of relative humidity measurement||±2.5% relative humidity from 5 to 95% at 23°C|
|Accuracy of temperature output||±0.4°C from -30 to +100°C
±0.4% from reading over +100°C
|Available temperature units||degrees Celsius, Fahrenheit|
|Accuracy and range of dew point temperature output - for more details see graphs||±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C
|Accuracy and range of absolute humidity output||±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400 g/m3
|Accuracy and range of specific humidity output||±2g/kg at ambient temperature T < 35°C
range 0 to 550 g/kg
|Accuracy and range of mixing ratio output||±2g/kg at ambient temperature T < 35°C
range 0 to 995 g/kg
|Accuracy and range of specific enthalpy output||±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995 kJ/kg
|Signal for binary inputs||from voltage-less contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
|Minimum pulse length at binary input||500 ms|
|Voltage at open contact||3.3 V|
|Low voltage level||0 to +0.5 V|
|High voltage level||+3.0 to +30V|
|Temperature operating range||-30 to +80°C|
|Temperature operating range of LCD display||readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C|
|Temperature compensation of the humidity sensor||all temperature range|
|Filtering ability of sensor cover||0.025mm - filter with stainless steel mesh|
|Communication protocol||ModBus RTU and Advantech ADAM compatible protocol|
|Communication speed||110 to 115200 Bd|
|IP protection||IP65 electronics, IP40 sensors|
|Power||9-30Vdc, power consumption approximately 1W|
|Length of the probe cable||1m, 2m or 4m optionally|
|Dimensions||136 x 159 x 45 mm (W x H x D), probe length 88 mm, probe diameter 18mm|
|Weight||approximately 500g - 1m probe|
Production facilities and warehouses - Monitoring of storage conditions and production processes in the temperature range -200 ° C to + 600 ° C.
Metrology - COMET sensors together with COMET radiationshields are the ideal basis for weather stations for long-term weather, climate and air monitoring.
Healtcare and laboratories - Monitoring of storage areas at temperatures up to -200 °C.
Industry and production - monitoring temperature and humidity in food, pharmaceutical, aerospace etc.
Food industry - Monitoring of critical processes according to the HACCP standard with the possibility of prompt notification of unforeseen events that could lead to the degradation of the goods.
Building management - Our instruments which measure temperature, humidity, atmospheric pressure and CO2 are an integral part of these industry-leading solutions.
Features description:* the features may vary depending on the device type
● industrial or interior design with protection up to IP65
● relays output 250Vac / 8A or 50 V on selected models