Bezrucova 2901
756 61  Roznov pod Radhostem
Tel.: +420 571 653 990



Multiloggers Transmitters
And Regulators
Recorder with Printer

T1110 Relative humidity outdoor, indoor probe with 4-20mA output

code: T1110
Ambient relative humidity transmitter. Outdoor, indoor use.

Only relative humidity output 4-20mA.Also available with direct temperature RTD Pt1000 sensor output.Other sensors on request.

Included in delivery:

  • Traceable calibration certificate
  • Quick start manual
  • Free program TSensor for configuring of the transmitter is ready to Download

Send request


Transmitter contains a microprocessor based control circuitry in a durable plastic case with connection terminals and sensors in a filter with stainless steel mesh. Humidity transmitter is equipped with 4-20mA output. Output range is user adjustable. Large dual line LCD is an advantage. Display is possible to switch off. Computerized design ensures temperature compensation of the humidity sensor and fail indication. State-of-the-art capacitive polymer sensor ensures excellent calibration long term stability, inertia against water and condensation. Transmitter is designed for use in non-aggressive environment.


APPLICATIONS - measuring and control of air humidity at:

  • building HVAC management
  • building HVAC automation
  • warehouses
  • glasshouses
  • manufacturers
  • museums, archives, galleries
  • air-conditioned rooms
  • weather stations

Transmitter is approved and homologated by
RENAULT and by PSA (PEUGEOT / CITROEN) car manufacturers.

Output is set to maximum range from the manufacturer 0 to 100%RH.
To set other range by the user buying of SP003 cable is necessary - see Optional accessory.
Free configuration program TSensor for transmitter adjustment is ready to download anytime.

If different adjustment of output is required, please specify required output range in the order. Adjustment is free of charge.

Ordering example: Transmitter T1110, output: RH 10 to 90%

Application wiring of the humidity transmitter

Typical application wiring of transmitter

Calculation of minimum power voltage Uss for proper operation:
Uss min> Uo min + Imax * Rz,
where: Uo min= 9 V
Imax... approximately 20 mA
Rz... sensing resistor (shunt)

Technical Data

Technical parameters Value
Output 4-20mA
Measured Value Relative Humidity
Construction Type Ambient Air
Design Industrial
Temperature Measuring Range to °C
Relay Output No
Two-State Input No
Lcd Display Yes
PoE No
Relative humidity range 0 to 100%
Accuracy of relative humidity measurement ±2.5% relative humidity from 5 to 95% at 23°C
Temperature operating range -30 to +80°C
Temperature operating range of LCD display readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C
Range of humidity sensor temperature compensation all temperature range
Current output - two-wire connection 4-20mA
Configuration of output range user adjustable from the PC
Filtering ability of sensor cover 0.025mm - filter with stainless steel mesh
Protection of the case with electronics IP65 electronics, IP40 sensors
Power 9-30Vdc
Dimensions 88.5 x 170 x 39.5 mm (W x H x D), stem length 75 mm
Weight approximately 150g
Warranty 3 years
T3110 Temperature and humidity outdoor, indoor probe with 4-20mA output T3110 Temperature and humidity outdoor, indoor probe with 4-20mA output
code: T3110
Ambient temperature, relative humidity transmitter. Outdoor, indoor use.
T3118 Interior temperature, humidity transmitter with 4-20mA output T3118 Interior temperature, humidity transmitter with 4-20mA output
code: T3118
Ambient humidity, temperature transmitter. Indoor use.