H3531 - thermometer hygrometer with Ethernet interface and relays
code: H3531Ambient humidity, temperature Ethernet sensor on cable with two relay outputs.
Sensor H3531 is designed for online monitoring of temperature, relative humidity of air without aggressive substances. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.
High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
The device is supplied with T+RH probe with 1m cable. Cable lengths 2m or 4m available optionally.
Included in delivery:
|Measured Value||Temperature + Relative Humidity|
|Construction Type||With T+RH Probe on Cable|
|Temperature Measuring Range||-30 to 105 °C|
|Relative humidity range||0 to 100%|
|Accuracy of relative humidity measurement||±2.5% relative humidity from 5 to 95% at 23°C|
|Accuracy of temperature output||±0.4°C|
|Available temperature units||degrees Celsius, degrees Fahrenheit|
|Computed values||dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy|
|Accuracy and range of dew point temperature output - for more details see graphs in manual||±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80°C
|Accuracy and range of absolute humidity output||±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400g/m3
|Accuracy and range of specific humidity output||±2g/kg at ambient temperature T < 35°C
range 0 to 550g/kg
|Accuracy and range of mixing ratio output||±2g/kg at ambient temperature T < 35°C
range 0 to 995g/kg
|Accuracy and range of specific enthalpy output||±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995kJ/kg
|Temperature compensation of the humidity sensor||all temperature range|
|Temperature operating range||-30 to +80°C|
|Number of relay outputs||2|
|Maximum switching voltage, current and power of relay output||50V, 2A, 60VA|
|Number of binary inputs||3|
|Signal for binary inputs||dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
|Minimum pulse length at binary input||500ms|
|Low voltage level at binary input||0 to +0.5V|
|High voltage level at binary input||+3.0 to +30V|
|Audible alarm||built-in beeper - switchable|
|LAN connection||RJ-45 connector, 10Base-T or 100Base-TX|
|Communication protocols||WWW, ModbusTCP, SNMPv1, SOAP|
|Alarm protocols||E-mail (SMTP authentication is supported), SNMP Trap, Syslog|
|Configuration||T-Sensor, Telnet, keyboard|
|Temperature operating range of LCD display||readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C|
|Filtering ability of sensor cover||0.025mm - filter with stainless steel mesh|
|Power||9 to 30Vdc, maximum consumption 1W|
|Power connector||co-axial, diameter 5.5 x 2.1mm|
|Length of the probe cable||1m, 2m or 4m optionally|
|Dimensions||136 x 159 x 45mm (W x H x D), probe length 88mm, probe diameter 18mm|
|Weight||approximately 410g - 1m probe|
|Instruction Manual||1.8 MB|
|Quick Start Manual||1 MB|
|Declaration of Conformity||110 kB|
|MIB tables||510 kB|
|WebSensors Catalog||8.6 MB|
|Comet Database, Code: CDB||more »|
|Comet Database One Click Installer - version 13.0-IV||337.5 MB|
|Comet Database - changes log||8 kB|
|Comet Database - main Manual||2.4 MB|
|How to run programs with database connection configuration taken from file||60 kB|
|Database Viewer for Comet Database, Code: DBV||more »|
|Comet Database Viewer version 22.214.171.124||23.6 MB|
|Comet Database Viewer changes log||4 kB|
|TSensor, Code: TSensor||more »|
|TSensor - free configuration program version 126.96.36.199||2.8 MB|
|TSensor - free configuration program - revision history||20 kB|
|SensorReader, Code: SensorRead||more »|
|SensorReader - free program for data recording from one sensor, version 188.8.131.52||1.9 MB|
|SensorReader changes log||2 kB|
code: CDBSystem for collecting, alarming and analysing of measured data from all COMET devices.
|Database Viewer for Comet Database
code: DBVLow cost browser Database Viewer enables several clients to view database from different places on network/internet.
|COMETEO Multi-plate Meteo Shield for Weather Sensors
code: F8100Newly developed multiplate meteorological screen for humidity and temperature transmitters. Solar radiation and weather shelter for meteo sensors.
|H3530 - thermometer hygrometer with Ethernet interface and relays
code: H3530Ambient humidity, temperature Ethernet sensor with two relay outputs.
|H3531R - rack mount thermometer hygrometer with Ethernet interface and relays
code: H3531RHumidity, temperature monitor with two relay outputs.
|Ethernet Multilogger M1140 - thermo hygro meter with 4 MiniDIN inputs
code: M1140Universal datalogger with 4 hardware MiniDIN inputs for connecting temperature and humidity probes.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.