H7530 - thermometer hygrometer barometer with Ethernet interface and relays
code: H7530Ambient temperature, relative humidity, atmospheric pressure with two relay outputs.
Sensor H7530 is designed for online monitoring of temperature, relative humidity of air without aggressive substances. Three binary inputs to detection of two-states signals are the advantage. Other devices are controlled by two relay outputs.
High precision capacitive polymer sensor ensures excellent long term calibration stability and ultimate accuracy. Measured values are also converted to other humidity interpretation: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
Included in delivery:
|Measured Value||Temperature + Relative Humidity + Atmospheric Pressure|
|Construction Type||Ambient Air|
|Temperature Measuring Range||-30 to 80 °C|
|Relative humidity range||0 to 100%|
|Accuracy of relative humidity measurement||±2.5% relative humidity from 5 to 95% at 23°C|
|Accuracy of temperature output||±0.4°C|
|Maximum measuring pressure range||600 to 1100hPa|
|Accuracy of atmospheric pressure||±1.3hPa at 23°C|
|Resolution||0.1°C, 0.1%RH, 0.1hPa|
|Available temperature units||degrees Celsius, degrees Fahrenheit|
|Computed values||dew point, absolute humidity, specific humidity, mixing ratio, specific enthalpy|
|Available pressure units||hPa, kPa, mbar, mmHg, inHg, inH2O, PSI, oz/in2|
|Accuracy and range of dew point temperature output - for more details see graphs in manual||±1.5°C at ambient temperature T<25°C and RH>30%
range -60 to +80 °C
|Accuracy and range of absolute humidity output||±1.5g/m3 at ambient temperature T < 25°C
range 0 to 400g/m3
|Accuracy and range of specific humidity output||±2g/kg at ambient temperature T < 35°C
range 0 to 550g/kg
|Accuracy and range of mixing ratio output||±2g/kg at ambient temperature T < 35°C
range 0 to 995g/kg
|Accuracy and range of specific enthalpy output||±3kJ/kg at ambient temperature T < 25°C
range: 0 to 995kJ/kg
|Temperature compensation of the humidity sensor||all temperature range|
|Temperature operating range||-30 to +80°C|
|Number of relay outputs||2|
|Maximum switching voltage, current and power of relay output||50V, 2A, 60VA|
|Number of binary inputs||3|
|Signal for binary inputs||dry contact, open collector or two-state voltage signal.
Inputs are not galvanically isolated.
|Minimum pulse length at binary input||500ms|
|Low voltage level||0 to +0.5V|
|High voltage level||+3.0 to +30V|
|Audible alarm||built-in beeper - switchable|
|LAN connection||RJ-45 connector, 10Base-T or 100Base-TX|
|Communication protocols||WWW, ModbusTCP, SNMPv1, SOAP|
|Alarm protocols||E-mail (SMTP authentication is supported), SNMP Trap, Syslog|
|Configuration||T-Sensor, Telnet, keyboard|
|Temperature operating range of LCD display||readable to operating temperature +70°C, it is recommended to switch OFF the LCD over +70°C|
|Power||9 to 30Vdc, maximum consumption 1W|
|Power connector||co-axial, diameter 5.5 x 2.1mm|
|Dimensions||136 x 213 x 45mm (W x H x D), stem length 75mm|
|Instruction Manual||2.3 MB|
|Quick Start Manual||1 MB|
|Declaration of Conformity||110 kB|
|MIB tables||510 kB|
|WebSensors Catalog||8.6 MB|
|Comet Database, Code: CDB||more »|
|Comet Database One Click Installer - version 13.0-IV||337.5 MB|
|Comet Database - changes log||8 kB|
|Comet Database - main Manual||2.4 MB|
|How to run programs with database connection configuration taken from file||60 kB|
|Database Viewer for Comet Database, Code: DBV||more »|
|Comet Database Viewer version 188.8.131.52||23.6 MB|
|Comet Database Viewer changes log||4 kB|
|TSensor, Code: TSensor||more »|
|TSensor - free configuration program version 184.108.40.206||2.6 MB|
|TSensor - free configuration program - revision history||20 kB|
|SensorReader, Code: SensorRead||more »|
|SensorReader - free program for data recording from one sensor, version 220.127.116.11||1.9 MB|
|SensorReader changes log||2 kB|
code: CDBSystem for collecting, alarming and analysing of measured data from all COMET devices.
|H7531 - thermometer hygrometer barometer with Ethernet interface and relays
code: H7531Ambient temperature, relative humidity, atmospheric pressure with two relay outputs.
|Multilogger M1321 - thermo-hygro-barometer with 2 MiniDIN and 2 Terminals
code: M1321Universal datalogger with 4 hardware inputs, internal sensor of Barometric pressure and with Ethernet interface.
Multilogger can be installed permanently to Ethernet network or work as portable device.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.