This website is using cookie files for provision of services, personalization of advertising and for analysing of visit rate.
By using this site you agree to our use of cookies. More information

manufacturer of measuring instruments
English Česky USA Polski Sweden Africa Magyar Español China Français

0-5V voltage datalogger with display

code: S5011

Data logger is designed for record of voltage. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.

The device includes Traceable calibration certificate with declared metrological traceability of etalons is based on requirements of EN ISO/IEC 17025 standard.

For communication with the PC must be from Optional accessories ordered USB adapter or COM adapter or start/stop magnet if is needed to control logging the other way than directly from computer.

Included in delivery:

Send request

Technical data

Measured value Voltage
Operating temperature range -30 to +70°C
Measurement accuracy ±0.2% FS
Resolution of voltage input 13 bits (8192 levels)
Signal character at binary input from potential-less contact or two-state voltage signal
Minimum pulse duration at binary input 500 ms (shorter pulses may not be recorded)
Maximum frequency at binary input 0.5 Hz (i.e. maximum 5 pulses for 10 s)
Power current through contact at binary input 3 uA (contact closed)
Voltage accross open contact at binary input maximum 3.6 V
Low voltage level at binary input 0 to +0.2 V (maximum current from the input 3 uA
High voltage level at binary input +3.0 to +30 V (maximum current to the input 100 nA
Built-in connector for input signals D-Sub 9 pins, male
Real time clock year, leap year, month, day, hour, minute, second
Data logging interval adjustable from 10s to 24h
Display and alarm refresh each 10s
Total memory capacity 32 504 records in noncyclic logging mode, 28 896 records in cyclic logging mode
Data logging modes noncyclic - data logging stops after filling the memory
cyclic - after filling memory oldest data is overwritten by new
Power Lithium battery 3,6V, size AA
Typical battery life in low-power mode (1 minute sampling) 6 years
Battery life in continuous on-line mode with interval 1 minute 4 years
Battery life in continuous on-line mode with interval 10 second 1 year
IP protection IP67 - protected against influence of temporary immersion into water
Dimensions without connectors 93x64x29mm
Weight including battery approximately 130g
Warranty 3 years



Aplikace - Zdravotnictví a laboratoře

Healtcare and laboratories - Monitoring of storage areas at temperatures up to -90 ° C.

Aplikace - Sklady

Food industry - Monitoring of critical processes according to the HACCP standard with the possibility of prompt notification of unforeseen events that could lead to the degradation of the goods.

Aplikace - Průmysl

Industry and production - monitoring temperature and humidity in food, pharmaceutical, aerospace etc.

Aplikace - Sklady

Production facilities and warehouses - Monitoring of storage conditions and production processes in the temperature range -90 ° C to + 260 ° C.

Aplikace - Serverovny a datová centra

Metrology - COMET sensors together with COMET radiationshields are the ideal basis for weather stations for long-term weather, climate and air monitoring.

Features description:

* the features may vary depending on the device type
● accurate measurement of Temperature, Humidity, Dew point, Current (4 – 20 mA), Voltage (0 – 5 V, 0 – 10 V), Pulses, Events
● nonvolatile memory for 32 000 values
● indication of alarm conditions via email, SMS or visually
● software for data analysis on PC
● communication interfaces - USB, RS232, GSM modem, Ethernet
● rugged design with protection up to IP67
● battery life up to 7 years
Záruka 3 roky Kalibrační list Teplotní čidlo Teplotní čidlo Dvoustavové vstupy Čítač pulsů Napětí Proud Dvouřádkový LCD displej Vnitřní paměť Napájení bateriemi