Multilogger - Low Cost Thermometer with 4 Thermocouple Inputs
M1200E is a battery operated datalogger that allows to monitor the actual measured values on the device display or to work with historical data in Comet Vision, where you can create table charts, PDF export, MS EXCEL.
The device is designed for measuring and recording with 4 inputs for thermocouples K, J, S, B, T, N.
Included is traceable calibration certificate in accordance with EN ISO/IEC17025.
M1200E is a battery operated datalogger that allows to monitor the actual measured values on the device display or to work with historical data in COMET Vision, where you can create table charts, PDF export, MS EXCEL. The device is designed for measuring and recording with 4 inputs for thermocouples K, J, S, B, T, N. Included is traceable calibration certificate in accordance with EN ISO/IEC17025.
TEMPERATURE SENSOR - thermocouple K, N
TEMPERATURE SENSOR - thermocouple J
TEMPERATURE SENSOR - thermocouple S
TEMPERATURE SENSOR - thermocouple B
TEMPERATURE SENSOR - thermocouple T
GENERAL TECHNICAL DATA
cyclic - after filling memory oldest data is overwritten by new
Restoring the original tempering hot-air heating system, Chateau Lednice
Type of application: Building Management - HVAC Culture
Cool Room temperature monitoring with MULTILOGGER
Type of application: Healthcare and Laboratory
Type of application: Building Management - HVAC Server rooms and data centers Culture
Masaryk University in Brno
Type of application: Industry Building Management - HVAC
Type of application: Industry
Up to 4 physical Thermocouple Inputs
- Themocouple probe K, J, S, B, T, N
- Direct input of bipolar voltages with range up to -60 to +140 mV
- Sensors with woltage output (range -60 to +140mV; accuracy ±100 µV or -18 to +18mV; accuracy ±20 µV)
Evaluation of up to 16 variables
The measured values are stored in the internal non-volatile memory. Memory capacity is up to 1 million values. Logging mode can be adjusted as non-cyclic, when logging stops after filling the memory, or cyclic, when after fulfilling the memory oldest stored values are overwritten by new ones.
Measured values are displayed on the screen with backlight option and the ability to change the size of display digits
Multilogger can be powered by AC adapter or by rechargeable batteries with charging capability. Batteries are always a part of the device (you can also use standard alkaline AA batteries). Batteries power the device for several months.
While using the AC adapter, the batteries provide backup operations and provide recording and measurement during power failure.
Alarm limits and alarm indication
It is possible to set two independent alarm limits for each channel (i.e. measured or calculated value).
Alarm signalization can be acoustic (built-in beeper), visual (LEDs, LCD)
Multilogger is always equipped with USB connector for communication, data analysis and also for charging of the rechargeable batteries.
Multilogger - Thermometer with 4 Thermocouple inputs and Ethernet port
Sixteen Channel Data Logger with Alarms
Ethernet Multilogger - thermo hygro meter with 4 MiniDIN inputs
Multilogger - thermo hygro meter with 2 MiniDIN and 2 Thermocouple inputs
Multilogger - universal 4 channel thermometer hygrometer with 2 MiniDIN and 2 Terminals
Multilogger - thermo-hygro-barometer with 2 MiniDIN and 2 Terminals
Ethernet Multilogger - thermo-hygro-CO2 meter with 2 MiniDIN and 2 Terminals
Multilogger - thermo-hygro-CO2-barometer with 2 MiniDIN and 2 Terminals
Ethernet Multilogger - universal datalogger with 4 inputs
Multilogger - thermo-hygro-CO2 meter with four inputs, up to 50 000ppm CO2